Operating The Radio - Aux In; Lcd Illumination; Using Usb Memory Device - PERFECTPRO USB BOX Mode D'emploi

Operating the radio – Aux In
1. Connect a stereo or mono audio source (like CD walkman or
MP3 player) to the Aux In socket, which is located on the side,
behind the rubber cover.
2. Press the SOURCE button to select AUX input. Display will show
AUX IN.
3. Play the file in the CD walkman or MP3 player.
4. Adjust the volume control to the required level.
Make sure rubber cover is closed well after use to prevent moist and dirt
from entering the radio.

LCD illumination

When radio is switched on, press any button except Power button will
illuminate the LCD display for approx. 15 seconds. However if you use
AC cord to power the radio, the LCD display will be always illuminated
until you turn the radio off by pressing Power button.

Using USB memory device

USB memory device can be used with the USBBOX for playback of MP3
or WMA files.
The USBBOX has been tested with a range of USB memory devices.
It supports USB memory device up to 32 GB. However, there are
many different USB memory device variants available and not all the
devices can be guaranteed to work in the USBBOX. USB Memory
device must use the FAT 16 or FAT 32 filing system in order to operate
with USBBOX.
13