Power The Radio; Ac Operation - PERFECTPRO USB BOX Mode D'emploi

Power the radio

1. Installing the batteries, first turn battery cover fixture anti-clockwise to
loosen and pull down the battery cover.
Note:
Before you insert the batteries, if you use non-rechargeable batteries,
make sure the Batteries/Charger switch which is located inside the
battery compartment is switched to Batteries position. If you use
rechargeable batteries, make sure to switch the Batteries/Charger
switch to Charger position.
2. Insert 4 x C size (UM-2) battery into the compartment. Ensure the
batteries are inserted in accordance with the diagram shown.
Close the battery cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time,
it is recommended that the batteries are removed from the radio.
Reduced power, distortion and a "stuttering" sound or low battery sign
flashing on the LCD display are all signs that the batteries need
replacing or recharging (see below charging the batteries).

AC operation

Before plugging the AC power cord into the AC socket, be sure the
voltage is correct. If you have batteries in the radio and connect the
AC power cord into the AC socket, the batteries will automatically
be disconnected.
AC power cord storage is designed to store the cord when the radio is
not in use.
GB
8