Recette (Rec); Commande (Ord) - Minebea Intec Maxxis 5 Mode D'emploi

Batch PR 5900/83
9.3.2

Recette (REC)

9.3.3

Commande (ORD)

FR-148
La base de données contient une entrée par ligne.
Structure
T_REC : STRUCT
ID : STR18;
Clean : BOOL;
Line : INT;
Section : INT;
fixTol : BOOL;
user *)
Temp : BOOL;
only *)
Mat : STR18;
Setp : REAL;
Total : REAL;
Prod : REAL;
PTol : REAL;
NTol : REAL;
CalcTotal : BOOL;
Relative : BOOL;
recalculated *)
Recalc : BOOL;
recipe *)
RMode : INT;
SPMin : INT;
SPMout : INT;
ChgBy : STR18;
ChgAt : DT;
END_STRUCT;
À chaque commande correspond une entrée dans la base de données. Les entrées sont
générées de manière interactive ou après vériication de la base de données "ORDER".
Structure
T_ORD : STRUCT
ID : STR18;
Sequence : DINT;
RecMat : STR18;
Mode : INT;
isRec : BOOL;
WP : INT;
material *)
Name : STR18;
Text : STR18;
Setp : REAL;
Expanded : BOOL;
Active : BOOL;
ChgBy : STR18;
*)
ChgAt : DT;
END_STRUCT;
(* name of the recipe *)
(* is cleaning *)
(* line number *)
(* number of the section *)
(* tolerance not yet changed by the
(* TRUE: delete if finished, manual
(* name of the material *)
(* set point of this line *)
(* last set point of the recipe *)
(* production total *)
(* upper tolerance *)
(* lower tolerance *)
(* use the lie to calculate total *)
(* set point of line must be
(* recalculation allowed for this
(* must be done automatically, ... *)
(* enable bit *)
(* material select *)
(* user has changed this line *)
(* at this date *)
(* order identification *)
(* sequence number *)
(* name of the recipe / material *)
(* how to do it *)
(* TRUE is assigned to a recipe *)
(* WP = 0 is recipe / choice, >0 is
(* name of the product *)
(* configuration dependent data *)
(* setpoint total recipe *)
(* recipe was already expanded *)
(* order is active *)
(* user has created / changed this order
(* at this date *)
9 Bases de données OPC
Minebea Intec