A Helmet In Your Size; Choose Your Size - shark Evo-GT V02 Manuel D'utilisation

A HELMET IN YOUR SIZE

WARNING! No helmet can protect
the wearer from all foreseeable
high or low speed impacts. However, for
maximum protection, the helmet must be
of proper fit and the chin strap must be
securely fastened as described in this
manual. Failure to have a proper fit and
to securely fasten the chin strap is dan-
gerous, as the helmet could come off in
an accident, resulting in severe head
injury or death.

CHOOSE YOUR SIZE

Each helmet is designed to corres-
pond to a head measurement (from for
XS up to XL). To measure your head
size, wrap a tape measure horizontally
around your head at a height of approxi-
mately one inch (2.5cm) above your
eyebrows. If your head measurement
falls between two sizes, first try on
the smaller hel-
4
met. However,
because of different head shapes, this
size reference can only be considered
as a guide. For maximum protection, it
is necessary to check that the helmet is
well suited for the shape of your head.
When trying a brand new helmet, make
sure that your head is pushed into the
helmet as far as possible, with the front
part just above your eyebrows, and with
the chin strap securely fastened as des-
cribed on the next page.
1. The helmet should feel very snug all
around your head and fairly tight on the
cheek pads. If not, it is too big for you;
select a smaller size.
See figure A.
2. With the chin strap properly fastened
(see instructions), be sure that the hel-
met cannot be moved excessively from
side to side or up and down.
You should feel the skin of your
head and face being pulled as you
B