A Helmet That Can Change Its Use - shark Evo-GT V02 Manuel D'utilisation

1/ PUTTING ON THE HELMET
For proper fitting, position the chin guard
while in the Jet configuration (i.e. open),
then grip it at the level of the chin straps in
moving the straps slightly apart to facilitate
sliding over the head. While carrying out
this movement, you are advised to keep
the two sections of the chin strap apart
with your thumbs so that they are properly
positioned.
Position the protective parts of the chin
strap buckle correctly and fasten it in
ac¬cordance with the recommendations
that are appropriate to the versions and
country.
Check that the tension and therefore the
positioning of the helmet are correct for all
positions.
2/ REMOVING THE HELMET
Release the chin strap ; hold the two
sections slightly apart as for putting the
helmet on and remove the helmet.
WARNING! NEVER move the chin
guard to change from a full face to
an open face helmet, or vice versa, while
in motion on your motorcycle. You can
loose control of your motorcycle, resulting
in an accident, personal injury or death.

A HELMET THAT CAN CHANGE ITS USE

A HELMET THAT CAN CHANGE
ITS USE
The Evo-ES is an helmet that can truly
change its use; it enables you to have
an integral helmet that provides you
with all aspects of protection, safety and
a waterproof visor while being able to
change to the Jet position with a chin
section that fits in perfectly with the profile
of the helmet. In this configuration, the chin
section causes no aerodynamic problems
and no instability of weight, and when in
the Jet position it passes all the approval
tests, in particular the test of rotating
acceleration.
Even though it is easy to effect the
movement, we advise that you transform
your helmet from the Integral to the Jet
position or vice versa only when you are
stationary.
obtain the correct fit of your helmet on
your head, DO NOT USE THE HELMET! See
your retailer for assistance.
WARNING! If
properly fasten your chin strap or
you cannot
9