Product Description; Introduction - Mettler Toledo InPro 8000 Série Instructions D'utilisation

InPro 8000 Series
1.

Product description

1.1

Introduction

We thank you for your decision to purchase a METTLER TOLEDO
InPro
®
the principle of backward scattered light.
Please keep this instruction manual in a safe place where it is readily to
hand for users of this sensor. If you have any questions regarding function of
the sensor and ancillary equipment, or if you consider that the descriptions/
instructions do not tally or are lacking, please contact your nearest METTLER
TOLEDO Authorized Distributor, who will be pleased to provide assistance.
Markings
The markings labeled on each sensor state the following information:
METTLER TOLEDO
Serial no. xxxxxx
The code following the model designation of the InPro 8050, InPro 8100
and InPro 8200 Sensors as printed on the package label provides in-
formation on the shaft material, sealing material for the optical window
(if present), and the length of the shaft in mm.
e.g. InPro 8200/S/Kalrez-FDA/205
with S = stainless steel shaft DIN 1.4435 or 1.4404 (316L)
Kalrez-FDA 6230 window seal
shaft length = 205 mm (8.07").
In addition:
H = Hastelloy C-22 shaft
Epoxy = Epoxy bonded window
See also chapter 7.1: "Ordering information sensors".
© 05/2017 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
8000 Series fiber optic measuring sensor with operation based on
Order no. 52 xxx xxx
5
InPro 8000 Series
52 800 247