Removal From Operation, Storage, Disposal; Removal From Operation; Storage; Disposal - Mettler Toledo InPro 8000 Série Instructions D'utilisation

InPro 8000 Series
5.

Removal from operation, storage, disposal

5.1

Removal from operation

The sensor is only conditionally subject to aging. When employed correctly
as intended and appropriately maintained and serviced, the lifetime of the
sensor can extend to several years.
Before removing the sensor from the process/process adapter, it must be
ensured that the process pressure has been reduced to a safe level and
the process temperature lowered to a safe range. Any escape of hot pro-
cess medium under pressure can cause damage to material/equipment or
injury to persons.
After demounting, the sensor should first be flushed with clear water.
If the sensor incurs a defect, it can as a rule not be repaired and must
be disposed under observance of prevailing regulations.
5.2

Storage

If the sensor is not needed for use, it can be stored dry.
5.3

Disposal

Disposal is to be carried out by the user in line with valid local regulations.
The user must either deliver the sensor to an authorized private or public
collection undertaking, or dispose of it himself in accordance with the
regulations for such items/materials.
The packaging consists of:
– cardboard
– foamed plastic
The sensor is comprised of:
– shaft, O-ring, sealing and window material as per specification
– HCS fiber optic cable, PVC sheathing
– protective tube of DIN 1.4435 (316L) or polyamide
© 05/2017 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
16
InPro 8000 Series
52 800 247