Télécharger Imprimer la page

Arai Helmet RX-7V Instructions D'utilisation page 6

Publicité

OPEN
OPEN
6
OPEN
CLOSE
CLOSE
CLOSE
CLOSE
OPEN
English
TO OPERATE DEMIST SYSTEM
A demist function is incorporated in the shield latch system to allow more rapid
clearing of any interior mist with the shield remaining partially latched. Push
the shield latch lever up to release shield into the demist position to assist
moisture dispersal
. To close the shield completely, push the shield down
until the latch post fully engages the shield and latch lever captures the bottom
of the shield
.
TO OPERATE BROWVENTS
The Browvents are operated from fully closed through intermediate, to fully open
positions by simply pulling the vent control down to open, pushing up to close.
TO OPERATE MOUTHVENT
The Monthvent is operated by simply pulling the vent control down to open,
pushing up to close. When the vent control is fully open, air is directed up along
the interior surface of the shield to help prevent fogging
mid-way position air is channeled back to further enhance the airflow around
the month and nose to help move hot moist air out faster
TO OPERATE TOP VENTS
Simply push the switches/levers on each vent to open/close the vents.
NOTE:
Do not use oils or waxes to lubricate vents or other moving parts.
If you must lubricate such components, sparingly use the silicone lubricant
supplied with your helmet for eyeport trim dressing.
and when it is in its
.

Publicité

loading

Ce manuel est également adapté pour:

Rx-7v rcCorsair-x