Publicité
①
②
④
14
English
TO REMOVE/REPLACE CHEEKPAD
When first servicing the cheekpads, it is suggested that you do only one at a time
so that the other can be used as a reinstallation guide.
To remove the cheekpads, first undo chinstrap.
③
Lift up the neckroll tab
forward lower edge of the pad assembly.
Pull the pad toward the rear of the helmet
slide it off the strap.
⑤
To take off fabric covering for washing, peel the covering off until all the fabric
is on the face side surface
grasping the rectangular collar to pull through the pad
NOTE: The cheekpad is equipped with a 5mmsurface foam layer. The layer is
⑥
removable to offer a bit more room if desired. Gently remove it from the pad.
Once removed this foam layer will not reattach securely
To wash fabric coverings, put them into lukewarm water with small amount of
laundry soap or your own shampoo and wash gently by hand. Rinse well with fresh
water and wipe off with a soft cloth. Dry them in the shade at ambient temperature.
Do not machine wash or dry.
WARNING: Never use petrol, thinner, benzene or any other solvents.
Even mild and seemingly harmless chemicals can cause damage over
a short period of time.
①
, which is inserted under the black covering at the
②
, then inward to release
④
. Then draw the covering through the opening by
⑤
.
⑥
③
and
.
Publicité
Chapitres
