Publicité
⑤
①
Left chinstrap cover (D-ring side)
Cache gauche de la jugulaire (côté anneau en forme de D)
Linke Kinnriemenabdeckung (D-ring seite)
20
⑥
②
Right chinstrap cover (long side)
Cache droit de la jugulaire (côté long)
Rechte Kinnriemenabdeckung (lange seite)
English
WARNING: Never use petrol, thinner, benzene or any other solvents.
To replace the lining, place the bosses over their plastic receptacles and push
⑤
⑥
&
them home
.
WARNING:
When reinstalling the comfort lining, be sure the lining is
properly positioned along the inside shape of the EPS (a.k.a. Styrofoam)
liner. If the comfort lining is not properly installed, the frame of the comfort
lining may fold when you put on and take off the helmet, which may injure
your skin, etc. Whenever you feel something is wrong with the comfort
lining, check that the lining is properly installed.
TO REMOVE/REPLACE CHINSTRAP COVERS
To remove the chinstrap covers, first remove the cheekpads as per previous
instructions.
Remove the plastic chinstrap anchor cover from the steel chinstrap anchor
and slide the cover off the chinstrap
Note the right and left, inside and outside of the chinstrap covers for
replacement.
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand. Rinse
well with fresh water and wipe off with a soft cloth. Dry them in the shade at
ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
②
.
①
Publicité
Chapitres
