Publicité
③
④
⑥
⑦
①
③
⑤
⑦
22
English
To replace the left chinstrap cover (D-ring side), ensure the female chinstrap
⑤
end snap side of the chinstrap and the leatherette side of the chinstrap cover
both face outward, slip the chinstrap cover onto the chinstrap
Position the plastic chinstrap anchor cover over the steel anchor and push the
cover in the anchor until the tab on the back of the cover snaps fully home
To replace the right chinstrap cover (long side), ensure the cap side of the
⑧
chinstrap end snap (Arai logo impressed) on the chinstrap and the leatherette
side of the chinstrap cover both face outward, slip the chinstrap cover onto the
chinstrap
anchor and push the cover in the anchor until the tab on the back of the cover
snaps fully home
②
TO REMOVE/REPLACE NECKROLL
First remove the cheekpads as per previous instructions.
To remove, pull out the neckroll end tabs, which are inserted into the chin center
pad at both sides
direction by 3cm – 4cm (1-1/4" – 1-1/2")
④
To wash the neckroll, put it into lukewarm water with small amount of laundry
soap or your own shampoo and wash gently by hand. Rinse well with fresh water
and wipe off with a soft cloth. Dry it in the shade at ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
⑥
To replace, insert the neckroll frame into the slot of the helmet
the neckroll on the helmet
frame are locked in the slot of the helmet
⑧
Replace the neckroll end tabs
⑥
⑦
&
. Position the plastic chinstrap anchor cover over the steel
⑧
.
①
. Grasp center of the neckroll firmly
③
⑥
. Further insert the frame so that the 3 tabs on the
⑦
⑧
, and replace the cheekpads.
③
④
&
⑤
.
②
, rotate it to either
④
and remove it from the helmet
.
⑤
, centering
.
.
Publicité
Chapitres
