Wolf ICBCT15E Guide D'utilisation Et D'entretien page 20

W O L F
T R O U B L E S H O OT I N G
P R O B L E M
Cooktop does not
function at all
Heating elements do not
heat properly
Heating elements cycle
off when unit is set for
full power
20
T R O U B L E S H O OT I N G
G U I D E
P R O B A B L E C A U S E
Cooktop is in Lock mode.
Cooktop is in Lock mode
and the timer display shows
an error code.
No electricity is being
supplied to the cooktop.
Fuse is blown or circuit
breaker is tripped.
Cooktop is not connected to
a proper electrical circuit.
Power supply connection
is loose.
Cooktop is not connected to
a proper electrical circuit.
Heating element temperature
limiters are temporarily
shutting off element due to
temperatures approaching
the maximum allowable limit
of the ceramic glass .
G U I D E
C O R R E C T I O N
Touch and hold the
symbol for 3 seconds to unlock
the control panel.
Errors may be cleared by
pressing the button.
Have an electrician check the
house power supply.
Have an electrician replace the
fuse or reset the circuit breaker.
Have an electrician verify that
the proper voltage is being
applied to the cooktop.
Have an electrician tighten
connections at the electrical
box.
Have an electrician verify that
the proper voltage is being
applied to the cooktop.
This is a normal function of the
cooktop. The elements will turn
on when the temperatures have
cooled sufficiently.