Wolf ICBCT15E Guide D'utilisation Et D'entretien page 17

W O L F E L E C T R I C C O O K TO P
C O O K TO P O P E R AT I O N
B R I D G E - Z O N E E L E M E N T G R I D D L E U S E
Always use a setting of 8 bars or less on the
bridge-zone element when cooking on a
griddle. Higher settings are not needed and
can damage the cooktop and cookware.
To preheat the griddle, set the bridge
element at 14 bars for 5 minutes, then turn the
heat down to 8 bars for cooking.
A griddle, open roaster, or fish poacher
should not be used when the bridge-zone
is off or on any of the other combination
of circular heating elements.
Timer display
area
Countdown timer
U S E & C A R E
T I M E R O P E R AT I O N
The electric cooktop features a countdown
timer located in the control panel. Refer to the
illustration below.
The timer may be set to any one-minute
increment from 1 to 99. Once set, the
remaining time will be illuminated in the
control panel as it counts down. The timer is
available for use in any mode except Lock
mode.
To turn on the timer, touch "+" on the
timer control.
Touch and hold "+" or "–" until the desired
time is reached. The timer will start 3
seconds after the last change in value.
When the timer reaches 0, the unit will
sound. The reminder will continue to sound
until
The illustration below shows the control panel
of Model ICBCT36E.
is pressed.
17