Restoringa Single Keymoved Key; Restoring All Keymoved Keys In A Single Mode - One for All Kameleon URC-9962 Guide D'utilisation

5. For the source key, press a key to be moved
once. For this example press VOL L once.
6. For the destination mode, press a desired
device key once (i.e., AUX, CBL/SAT, CD, TV,
DVD, AUDIO, VCR, or PVR). For this example,
press DVD once. The selected destination
device menu screen, including HOME, will
be displayed.
7. For the destination key, press a key to be
moved once. For this example press VOLL
once. Upon keymoving, the two bottom IR
segments will flash twice as confirmation.
The Program Keys will appear again.
8. Repeat steps 2 through 7 two more times to
map the remaining volume control keys,
substituting VOLM and MUTE as source and
destination keys in steps 5 and 7.
9. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
Upon completion of the above procedure, you
can now use your OFA Kameleon 8-Device
Remote to control the TV's volume and mute in
the DVD mode, as well as in the TV mode.
R A S
ESTORING INGLE
1. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly.
2. Press the destination mode once where the
keymoved key is stored. Then press OTHER
once.The Other programming screen will appear
(as shown above right):
.
K K
EYMOVED EY
3. Using the Number Keys, enter 9 9 4. The two
bottom IR segments will flash twice.
4. Press the destination mode once where the
keymoved key is stored. Then press the
destination key twice. Upon key restoration,
the two bottom IR segments will flash twice
as confirmation. The Program Keys will
appear again.
5. If desired, repeat steps 1 and 2 to restore
another key.
6. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
R A K
ESTORING LL EYMOVED
S M
INGLE ODE
1. Perform steps 1 through 3 of Programming
Keymover on the previous page.
2. Press the destination mode twice where
the keymoved keys are stored. Upon key
restoration, the two bottom IR segments will
flash twice as confirmation. The Program
Keys will appear again.
3. Exit programming by pressing HOME once.
The display will return to the last-selected
device menu screen
U ' G
SER S UIDE
.
K I A
EYS N
.
Using Keymover 21