Programming Dvd/Vcr Player Combo Control - One for All Kameleon URC-9962 Guide D'utilisation

K
AMELEON
PROGRAMMING DVD PLAYER/
VCR COMBO CONTROL
1. Turn on the DVD Player/VCR Combo and
insert a DVD.
NOTE: Please read steps 2 through 10 completely
before proceeding. Before starting step 2, review
the "Setup Codes For DVD Player/VCR Combos" (on
page 75). Brands are listed alphabetically in order of
most popular codes first. Highlight or write down
the devices and the codes you wish to program.
2. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly:
3. Press DEV SET once.The Device Setup
programming screen will appear:
4. Press DVD once. The key will animate.
5. Use the Setup Codes For DVD Player/VCR
Combos (on page 75) to locate the brand
name and then use the Number Keys to enter
the first four-digit code for your device.
If performed correctly, the two bottom
IR segments will flash twice.
10 Programming DVD Player/VCR Combo Control
8-D R
EVICE EMOTE
NOTE: If the two bottom IR segments displayed
one long flash instead, an error has occurred.
Try entering the same code again.
6. Aim the remote control at the device and press
POWER once. The device should turn off.
7. If the code works, press OK once. The two bot-
tom IR segments will display one long flash.
8. (Optional) If you've located a setup code that
works, but it also has a separate VCR code as
listed on page 75, you'll also need to program it
into the remote control to access VCR controls
as follows:
a. Press VCR once.
b. Using the Number Keys, enter the four-
digit VCR code for your DVD Player/VCR
Combo. If performed correctly, the
two bottom IR segments will flash twice.
c. Press OK once. The two bottom IR
segments will display one long flash.
NOTE: If a separate VCR setup code is not listed,
you can use the VCR key to program a separate VCR
device or another device (see "Reassigning Device
Keys" on page 20).
9. To exit programming, press HOME twice. The
display will return to the last-selected device
menu screen.
10. For future reference, write down the working
DVD Player/VCR Combo code in the below
boxes:
DVD Player/VCR Code:
VCR Code (if used):