Using Keymover; Programming Keymover; Restoring Keymoved Keys To Default Setting - One for All Kameleon URC-6692 Guide D'utilisation

OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 15 Monday, April 11, 2005 12:45 PM
The AUX key is now ready to be
programmed for your second DVD. (See
Programming Device Control on page 8.)
To re-assign other device keys to the AUX
key, repeat steps 1 through 4 above by
substituting the sequence from the chart:
To Re-Assign
Device Key... Perform Sequence...
AUX TV
as 2nd key:
SET
AUX
AUX
as 2nd
SET
VCR/ PVR
key:
VCR/PVR
AUX
as 2nd
SET
CBL/SAT
key:
CBL/SAT
AUX AUD
as 2nd
SET
key:
AUD
You can also re-assign another unused
device key by substituting an open key for
the AUX key in the above chart and
performing the sequence. For example, to
re-assign an unused CBL/SAT key as a 2nd
TV key, perform SET 9
CBL/SAT. When a re-assignment is done,
the Inner IR Segments will blink twice to
confirm your choice. At that time, you will
need to program the remote control for the
new device (see Programming Device
Control on page 8).

USING KEYMOVER

OFA Kameleon™ 6-Device Hybrid Remote
(URC-6692) includes a Keymover feature
that allows you to map (or copy) keys from
one mode (i.e., source mode) to another
mode (i.e., destination mode).
NOTE: The following keys cannot be used as
a source or destination: TV, CBL/SAT,
VCR/PVR, DVD, AUD, AUX, FAV, and SET.
P
ROGRAMMING
For example, if your VCR does not have
volume control, you can map the volume
and mute keys from the TV mode to the
VCR mode as follows:
1. Press and hold SET until the two Inner
9 9 2 TV
IR segments flash twice. The current
mode key will blink on and off during
programming.
9 9 2
AUX 2. Enter 9 9 4. The Inner IR Segments
will blink twice.
9 9 2
3. For the source mode, press TV once.
AUX
4. For the source key, press VOL+ once.
9 9 2
5. For the destination mode, press
AUX VCR/PVR once.
6. For the destination key, press VOL +
once.
IR Segments will blink twice
indicating the keymoved sequence is
correct.
9 2 TV
7. Repeat steps 1 through 7 twice more,
substituting VOL- and MUTE as source
and destination keys in steps 4 and 6.
Upon completion of the above procedure,
you can now use your OFA Kameleon™ 6-
Device Hybrid Remote (URC-6692) to
control the TV's volume and mute in the
VCR mode, as well as in the TV mode.
R
ESTORING
S
ETTING
Restoring A Single Keymoved Key
Press a device (e.g. VCR/PVR) key that
1.
has a keymoved key.
O ' M
WNER S ANUAL
K
EYMOVER
K K T D
EYMOVED EYS O EFAULT
Using Keymover 15