Weller WXR 3 Traduction De La Notice Originale page 21

Parameter menu
Standby Temp.
The soldering tools have a usage detection device
(sОnsor) Тn tСО СanНХО wСТМС automatТМaХХв ТnТtТatОs
МooХТnР to StanНbв tОmpОraturО wСОn tСО soХНО-
ring tool is not in use.
Standby time (temperature deactivation)
When the soldering tool is not in use, the tem-
pОraturО Тs rОНuМОН to StanНbв tОmpОraturО on
ОxpТratТon oП tСО sОt StanНbв tТmОέ TСО НТspХaв
rОaНs „StanНbв"έ
PrОss МontroХ ФОв to ОxТt StanНbв moНОέ TСО
sensor integrated tool detects the change in state
anН НОaМtТvatОs StanНbв moНО as soon as tСО tooХ
is moved.
AUTO OFF time (automatic switch-off time)
When the soldering tool is not in use, the soldering
tool heater is switched off when the AUTO OFF
time expires.
Temperature deactivation is performed indepen-
НОntХв oП tСО sОt stanНbв ПunМtТonέ TСО aМtuaХ
temperature is indicated and serves as a residual
СОat НТspХaвέ TСО НТspХaв rОaНs „χUTτ τόό"έ
Sensitivity
Option Description
σonάsОnsТtТvО – RОaМts to СОavв (ХonР) movОmОnt
low
stanНarН (ПaМtorв sОttТnР)
normal
SОnsТtТvО ά RОaМts to ХТРСt (sСort) movОmОnt
high
--- The tool is not supported
Max. hot air duration WXHAP
TСО onάtТmО oП tСО Сot aТr low oП tСО WXώχP Мan
be limited in increments of 1 to between 0 and 300
sОМέ TСО ПaМtorв НОПauХt Тs ί s („τόό"), ТέОέ aТr lows
onХв as ХonР as tСО button on tСО Сot aТr tooХ or tСО
optional footswitch is pressed.
Offset (Temperature-Offset)
The actual soldering-tip temperature can be
aНaptОН bв ОntОrТnР a tОmpОraturО oППsОt arounН ±
ζί °ω (± ιβ °ό)έ
www.valuetronics.com
Menu access
Menu access
Option Description
stanНbв tТmО Тs НОaМtТvatОН (ПaМtorв
OFF
sОttТnР)
1-999 min stanНbв tТmО, ТnНТvТНuaХХв aНjustabХО
--- The tool is not supported
Menu access
Option Description
OFF AUTO OFF function is deactivated
(ПaМtorв sОttТnР)
1-999 min AUTO-OFF time, can be set indivi-
НuaХХвέ
Menu access
Menu access
Option Description
σo НuratТon НОinОН
OFF
(ПaМtorв sОttТnР)
InНТvТНuaХХв aНjustabХО
1-300 s
Menu access
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Tool parameters
Tool parameters
39