Kettler 07885-300 Mode D'emploi Et Instructions D'entraînement page 19

GB
P1: Incline Profile 4
P1: Incline Profile 5
P1: Incline Profile 6
P2: SPEED PROGRAM: WITH 6 DIFFERENT PROFILES
In the "P2: Speed Program" you can choose between 6 preset pro-
files. You can increase / decrease the speed or the incline at any
time during the training. The time setting in the display will decrease
and the distance covered will increase.
1. Switch on the device.
2. Attach the safety key to the treadmill and the clip to the clothes
of the user.
3. Select the "P2 : Speed Program" with the cursor buttons and
confirm with Enter
4. Confirm (Enter) or change (Cursors buttons) the time input
5. Select a profile (cursor buttons) and confirm with Enter
6. Confirm (Enter) or change (Cursors buttons) the maximum speed
7. Confirm with Enter to begin the training.
8. The training can be interrupted at any time by pressing the
STOP button. A restart of the training is possible during the first
3 minutes.
9. At the end you can save the current programme (USER key),
choose a user number 1 to 4 with the cursor key and confirm
by pressing enter.
P2: Speed Profile 1
P2: Speed Profile 2
P2: Speed Profile 3
P2: Speed Profile 4
P2: Speed Profile 1
P2: Speed Profile 6
P3: CALORIE PROGRAM
You can increase / decrease the speed or the incline at any time
during the training of this program. It is useful for maximised fat bur-
ning. The calorie amount will be shown in the top right corner of
19