EN
PRECAUTIONS AND SAFETY FEATURES
Machine design has taken into account all reasonable user safety precau-
tions; nevertheless, particular conditions of installation and/or handling may
create unforeseen situations beyond the installer's control which will require
case-by-case evaluation of residual risks. We recommend keeping the fol-
lowing in mind:
• Always handle the machine with care to avoid the danger of its falling.
• The packing materials (carton, cellophane, staples, polystyrene, etc..) can
cut, wound or create hazards if used improperly or handled carelessly.
Store such materials out of reach of children and irresponsible persons.
• This symbol on the appliance or package means that the appli-
ance must not be considered as normal household refuse but
that it must instead be delivered to an appropriate collection
centre for the recycling of electric and electronic appliances.
Make sure that this appliance is disposed of correctly and you
too will be making your contribution to the prevention of nega-
tive effects on health and the environment, which could otherwise be
caused by inadequate disposal. Recycling materials helps to preserve
our natural resources. For more information about how to recycle this
product, you can contact your local council office, local refuse disposal
service or the retailer from whom you purchased the appliance.
• Before carrying out any installation or adjustment process, be sure to
have read and thoroughly understood the warnings in this manual.
• The company cannot be held liable for any damage to people or property
resulting from failure to respect the instructions concerning safety, instal-
lation and maintenance contained in this manual.
• The power cord of this appliance must never be replaced by the user. In
the event of damage, switch off the appliance and only contact profes-
sionally qualified technicians for its replacement.
• Should you decide to no longer use this type of appliance, we recom-
mend that you make it inoperative: unplug the appliance from the mains
socket and cut off the power cord.
• All defects and/or anomalous machine behaviour should be reported
immediately to authorized installation and/or maintenance personnel.
• Before connecting the machine, check that electrical power supply cor-
responds to the specifications on the data plate.
• Should the machine plug not be compatible with your socket, have the
plug replaced with a suitable type by a qualified technician, who should
also check that the section of the wires supplying the power outlet is suit-
able for the machine power requirements.
• Avoid use of multiple-plug adapters and extension cords.
MDJ ON DEMAND
13