Nuova Simonelli MDJ ON DEMAND Manuel D'instructions page 21

EN
4. LOCKING THE CONTAINER
Before operating the appliance, it is necessary to fit the coffee bean container (7).
• Insert the container (7) into its seat, positioning it so that the hole lines up with the screw
on the back part of the appliance.
• Tighten the lock screw.
5. INSTRUCTIONS FOR USE
5.1 INTRODUCTION
This appliance can make doses based on the grinding time.
It is furthermore necessary to set up the appliance before operating, by determining first of
all the coffee blend type (more roasted or less) and the degree of grinding.
Grinding time is then set for each dose key by weighting the grinding product.
• After having plugged the appliance in, push the tab (8) at the bottom of the coffee bean
container (7) to close it.
• Remove the cover (6) from the container (7) and fill it with coffee beans.
• Bring the switch (13) to on position.
• Pull the tab (8) permitting passage of coffee beans.
• Select the single or double dose through the corresponding keys (3)
Place the filter holder onto the fork (12) and insert it against the filter holder restraint, push
it forward until it touches the key (11) to dispense the ground coffee from the correspond-
ing spout (10). Dispensing stops once the preset time has elapsed.
MDJ ON DEMAND
or (5) .
19