Nuova Simonelli MDJ ON DEMAND Manuel D'instructions page 22

5.2 GRINDING SETTING
Set grinding by means of the adjusting knob (9), by rotating it clockwise to make powder
finer or anticlockwise to increase the size of its grain as shown on the knob. Setting is step-
less; it is to be gradually performed, by grinding some coffee every two notches maximum.
When knob is rotated of a turn with stationary motor, the appliance may stop.
5.3 FILTER HOLDER FORK HEIGHT ADJUSTMENT
• By using a crosshead screwdriver, loosen the fastening screw of the filter holder fork (12)
It is recommended not to unscrew the screw completely.
• Raise or lower the fork in order to adjust it according to filter holder dimensions.
• Once having reached the correct position, tighten the fork fastening screw (12).
• The appliance is equipped with a filter holder retaining device.
20
EN
MDJ ON DEMAND