Safety Prescription - Nuova Simonelli AURELIA II Manuel D'instructions

2.

SAFETY PRESCRIPTION

☞
This book is an integral and essential
part of the product and must be given
to the user.
Read this book carefully. It provides
important information concerning
safety of installation, use and mainte-
nance.
Save it carefully for future reference.
☞
The illustrations in this manual are
purely for information purposes.
Your machine may differ slightly from
the one shown here.
Nuova Simonelli reserves the right to
make any changes to products and
the manual without the need for any
updates to previous products and
manuals.
☞
After unpacking, make sure the appli-
ance is complete.
In case of doubts, do not use the
appliance, but consult a qualified
technician.
Packaging items which are potential-
ly dangerous (plastic bags, polysty-
rene foam, nails, etc.) must be kept
out of children's reach and must not
be disposed of in the environment.
44
DANGER OF POLLUTION
☞
Before connecting the appliance
make sure the rating plate data cor-
respond with the mains.
This plate is on the front panel at the
top right hand side of the appliance.
The appliance must be installed by
qualified technicians in accordance
with current standards and manufac-
turer's instructions.
The manufacturer is not liable for any
damage caused due to failure to
ground the system.
For the electrical safety of the appli-
ance, it is necessary to equip the
system with the proper grounding.
This must be carried out by a quali-
fied electrician who must ensure that
the electric power of the system is
sufficient to absorb the maximum
power input stated on the plate.
☞
In particular you must ensure that the
Fig. 4
size of the wiring cables is sufficient
to absorb power input.
The use of adapters, multiple sockets
or extensions is strictly forbidden. If
they prove necessary, call a fully
qualified electrician.
☞
For appliances powered at 220-230 V,
the maximum impedance from the
mains must be no higher than 0.37
Ohm.
☞
When installing the device, it is nec-
essary to use the parts and materials
supplied with the device itself.
Should it be necessary to use other
parts, the installation engineer needs
to check their suitability for use in
contact with water for human con-
sumption.
Fig. 5