Electrical Installation - Burkert 6128 Manuel D'utilisation

note!
If the tightening torque is too great, the device may
be damaged!
• Observe the maximum tightening torque of the screws!
→
Attach valve to manifold:
Screw in screws at 0.8 Nm.
Tightening torque
0,8 Nm
→
Attach coil to body.
english
24
Arrangement of the bores:
3-way
english
26
2-way
Danger!
Risk of electric shock if the protective conductor
function is defective!
• After installing the coil, check the function of the pro-
tective conductor (see chapter entitled "8.3. Electrical
Installation").
Dimensional drawing for manifold:
27
18
M3 min. 6 deep
max. ∅4
NC IN/OUT NO
45.5
18
M4 min. 6 deep
max. ∅4
M3 min. 6 deep
44

8.3. electrical installation

Danger!
Risk of injury due to electrical shock!
• Before reaching into the device or the equipment,
off the power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety
regulations for electrical equipment!
Types of electrical connections:
Connection above
Rectangular Flying leads
plug
Type 6128, 6608
Flange layout for
manifold mounting
Flange layout for
single mounting
with clamp
english
25 25
switch
Circular plug
english
27 27