Publicité
Installation
23. Remove all shims.
24. See the LX1 Installer's Manual for fi nishing materi-
als details. To enclose the 2100HSC kit, 1/2" cement
board (or other non-combustible board) is required.
When attaching drywall/cement board to steel frame
or fi replace body, we suggest using self-drilling
screws, 1-1/2" length. Note: you may be penetrat-
ing two layers of sheet metal when fastening to the
middle section.
Min 3"
above
bottom of
opening
Bottom panels
(removed)
WARNING
Do not drill or drive screws into these
marked areas (on both sides)! Electrical
and gas services are located here. See
LX1 Installer's Manual for more detail. If
in doubt, remove the bottom plates from
the opening and verify what is behind the
panels.
Steel Framing Kit
WARNING
Ensure weight of wall above is
NOT carried by the appliance.
7
Publicité
