Becker BECK-O-TRONIC 5 pot.-frei Notice De Montage Et D'utilisation page 15

Radio-controlled operation
With.the.aid.of.the.handheld.transmitter,.the.roller.
door.can.be.remote-controlled.in.the.following.im-
pulse.sequence.(UP-STOP-DOWN-STOP....etc.).
Programming the handheld transmitter
Proceed. as. follows. to. program. the. handheld.
transmitter. or. a. button. of. a. multi-channel. hand-
held.transmitter:
1.. Open. the. lid. of. the. BECK-O-TRONIC. 5. pot.-
free.by.loosening.the.four.lid.screws.and.plac-
ing.it.onto.the.BECK-O-TRONIC.5.pot.-free.as.
shown.in.the.adjacent.figure.
Funk
PRG
2.. Briefly.press.the.radio.PRG.button.at.the.bot-
tom.right.of.the.control.unit.
3.. The.BECK-O-TRONIC.5.pot.-free.signals.pro-
gramming. mode. (10. seconds). via. a. flashing.
green.LED.
Funk
PRG
4.. Press.the.button.on.the.handheld.transmitter.
which.is.to.be.programmed.
After. successful. programming. of. the. handheld.
transmitter,. the. BECK-O-TRONIC. 5. pot.-free.
switches. back. to. operating. mode. (green. LED.
lights. up).. This. procedure. can. be. used. to. pro-
gram.a.total.of.ten.buttons.or.handheld.transmit-
ters.(1-channel).
5.. Close.the.BECK-O-TRONIC.5.pot.-free.
de
en
fr
nl
15