Marshall CODE 50 Manuel D'utilisation page 13

FRONT PANEL FUNCTIONS (CONT.)
17. MOD (CONT.)
Tremolo
The cool sounding Tremolo effect is created by the signal amplitude being modulated
up and down. Tremolo can produce a variety of sonic characteristics from delicate
shimmer to heavy Tremolo throb. Tremolo's editable parameters are:
PARAMETER VALUE RANGE
Mode VLV & SQR
Speed 0 - 10
Depth 0 - 10
Skew -50 to +50
18. DEL
DEL is short for Delay. Delay FX in a conventional setup can be in stompbox or rack form
and often connect via an amplifier's FX loop. When you select DEL the switch's LED will
remain lit red for two seconds before flashing to indicate the current Delay tempo. CODE's
Delay FX are:
Studio
Studio Delay is a high fidelity delay line. Its longer delay time enables you to layer
what you play in up to 4 second loops. Studio Delay's editable parameters are:
PARAMETER VALUE RANGE
Time 0 - 4000
Feedback 0 - 10
Frequency 0 - 10
Level 0 - 10
MODULATION FX
DESCRIPTION
Valve Tremolo & Square Wave Tremolo.
Controls the rate of Tremolo oscillation.
Adjusts the depth of the Tremolo effect.
Adjusts the shape of the waveform that is performing
the amplitude modulation. The variation of the wave
shape across the value range moves between vintage
and modern sounding Tremolo.
DELAY TYPES
DESCRIPTION
Controls the Delay repeat time in milliseconds.
Adjusts the number of Delay repeats.
Adjusts the amount of higher frequency content in the
Delay repeats.
Adjusts the level of the Delay effect.
ENGLISH
A: >>|<<
A: >>|<<