Publicité
6.4 Operating in Manual mode
Manual mode is for both facial and body treatments. This mode allows you to
follow your own treatment regime. It will not inform you about treatment times,
areas or give you instructions on how to use it. The timer however, will keep track
of the treatment time that has passed.
1.
Press the power button
2.
Press the mode button
3.
Press the control buttons
Level 1 is the lowest level; while level 3 is the highest level.
4.
Press the start/pause button
7.
Cleaning and maintenance
Risk of damage!
Always turn off and unplug the device before cleaning or replacing the
C
spare parts.
C
Never immerse the device or any parts in water or other liquids. Make sure
that no water or other liquids penetrate the housing.
Do not use any aggressive cleaners, brushes with metal or nylon bristles, or
C
sharp or metallic cleaning utensils such as knives, hard scrapers and the like.
7.1 Cleaning the housing and the charging cradle
1.
Wipe the device
pin of the charging cradle or the hole on the bottom of the device) with
a damp cloth.
2.
Wipe it completely dry with a dry cloth.
7.2 Cleaning the tip
1.
Remove the tip (
its inner side with the brush
and debris.
2.
Wipe the outside of the tips thoroughly with a damp cloth.
3.
Let it dry completely.
5
to switch on the device.
3
to select "Manual".
6
to select the desired intensity level.
4
to begin the treatment.
1
and the charging cradle
8
9
10
11
/
/
/
16
after each use to remove dead skin cells
9
7
(avoid contacting the
) from the device and gently clean
EN
Publicité
