Parkside PLG 20 C1 Traduction Des Instructions D'origine page 26

GB MT
NOTICE! Risk of damage! An incorrect
battery can damage the device and
battery.
Inserting the battery
1. Push the battery (4) along the guide
into the battery holder.
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release
(1) on the battery (4).
2. Pull the battery out of the battery
holder.
Operation
Control display
Meaning of the control indicators (6/
7) on the charger:
green (6) red (7)
lights up —
— lights up
— flashes
flashes flashes
Charging the battery
NOTICE! Risk of injury from electric
shock. Only charge the battery in dry
areas. The external surface of the bat-
26
tery must be clean and dry before be-
ing connected to the charger.
Notes
• If warm, allow the battery to cool
Procedure
1. If necessary, remove the battery (4)
2. Slide the battery (4) into the char-
3. Plug the charger (5) into an power
4. Once charging is complete, discon-
5. Pull the battery (4) charging slot out
Used batteries
• If the operating time is considerably
Meaning
• Battery
is fully
charged
• stand-
by (No
battery
inser-
ted)
• Always observe the safety inform-
Battery is
charging
Battery
is over-
heated
Cleaning, maintenance
Battery is
defective
and storage
tect yourself when performing main-
tenance or cleaning work. Pull the
mains plug and remove the battery.
before charging.
from the cordless device.
ging slot (8) of the charger (5).
outlet.
nect the charger (5) from the mains
supply.
(8).
shortened despite charging, this
shows that the rechargeable battery
is depleted and must be replaced.
Only use an original replacement
battery of the series X 20 V TEAM,
which can be purchased from the
online shop (see Spare parts and
accessories, p. 31 ).
ation in addition to the regulations
and information about environment-
al protection (see Disposal/environ-
mental protection, p. 27 ).
WARNING! Electric shock! Pro-