Publicité
IV. GETTING STARTED
WARNING!
Do not attempt to operate the product until assembly is complete. Failure to comply could
result in possible serious personal injury.
4.1- Unpacking
• CAUTION! Lifting hazard. This product is heavy and requires a minimum of 2 people to
lift. Lift and lower with your legs by bending at the knees, not your back, to avoid injury.
• Remove the product from packaging.
• Check if the product and accessories (if any) are intact.
Packing List
Water pump main unit
Strainer and cap (a)
Hose adaptor (b)
Adaptor collar (c)
Hose clamp (d)
Gasket (e)
Rubber feet (f)
Spark plug wrench (g)
Main wheel (h)
Handle (i)
Screw and nuts packet (j)
4.2- Assembly
Mounting of main wheels (12)
• Insert the wheel axle rod (k) into the mounting shafts (l) of the cradle frame and secure with
the supplied washers (m) and split pins (n). See Fig. 2.
PRMPC213/27P
x1
x1
x2 (2")
x2 (1,5")
x2 (2")
x2 (1,5")
x3 (2")
x2 (1,5")
x2 (2")
x2 (1,5")
x2
x1
x2
x1
x1
PRMPC214/60C
x1
x1
x2 (3")
x2 (3")
x3 (3")
x2 (3")
x2
x1
x2
x1
x1
Page 17 / 39
Publicité
