Miele PFD 104 SCVi Mode D'emploi page 37

The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
 Set the water hardness level in your
area and confirm using OK.
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages 
may appear.

Refill rinse aid
 Add salt and rinse aid if necessary
(see the "Dishwasher salt" and
"Rinse aid" sections in the "Before
using for the first time" chapter).
 Select OK to confirm the messages.
The programme selected will appear
briefly in the display and the appropriate
sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated running time for the programme
selected.
en - Before using for the first time
and
Refill salt
Opening the door
In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This function can be deactivated if you
wish.
This dishwasher has a motorised door
opener which is activated by knocking
on the door front (Knock2open func-
tion).
 Knock twice in quick succession on
the top third of the door front.
The door will open a little.
 Hold the door at the top edge and pull
the door out of the lock.
37