Télécharger Imprimer la page

Sime Planet Dewy 30 BF Instructions D'utilisation page 10

Masquer les pouces Voir aussi pour Planet Dewy 30 BF:

Publicité

– Current values
ENG
FR
– Vacation function
– Default values
– Error display
10
15
16
17
18
NOTE:
The vacation period may be cancelled by pressing a key of the operating mode.
19
ATTENTION
The values of the following line numbers previously entered will be lost.
• Temperature and time program
• Vacation period
Ignition lock-out
0
Rotate selector CR/OFF/EST/INV/RESET on the boiler control panel to the release position
(
) to reset operation.
If the lock-out re-occurs, call an authorised Service Centre.
Safety thermostat trip
1
Rotate selector CR/OFF/EST/INV/RESET on the boiler control panel to the release position
(
) to reset operation.
If the lock-out re-occurs, call an authorised Service Centre.
Domestic hot water sensor fault (SB)
6 7
Call an authorised Service Centre.
Heating sensor fault (SM)
68
Call an authorised Service Centre.
Insufficient water pressure
69
Reset operation using the boiler charge valve.
Plant overpressure
70
Call an authorised Service Centre.
Safety/smoke thermostat trips
1 92
Call an authorised Service Centre.
Ventilator malfunction
1 93
Call an authorised Service Centre.
No communication between the "Logica Remote Control" and the boiler
1 95
Call an authorised Service Centre.
Flowmeter fault.
1 99
Switch-off the boiler and then try to ignite again. After 2 or 3 unsuccessful attempts, do not
try again but call authorised Service Centre.
Display and setting of the gradient of the heating characteristics curve.
Display of the current boiler temperature.
Display of the current power of the burner and of the current operating mode
(
= = heating/
= hot-water service)
To enter the number of days of absence.
In the display the vacation symbol will be shown (
tion (1 = Monday/7 = Sunday) and on the right the number of vacation days.
During the vacation the regulator will be on the availability mode.
When the set days have elapsed, the regulator will go on to the automatic function.
To take the setting to the default values, press the
same time for at least 3 seconds. As confirmation a sign will appear on the display.
), on the left the day of activa-
and
1
10
to
18
keys at the

Publicité

loading

Ce manuel est également adapté pour:

Planet dewy 50 bf