Xylem TitroLine 7800 Mode D'emploi page 172

172
If you connect the electrode, the electrode menu is automatically displayed with the characteristics of the
electrode (such as name, batch number, etc.) for about 10 seconds (Fig. 36).
Fig. 36
The display then switches to the normal display, showing in this case (Fig. 37), the conductivity in µs/cm and the
temperature:
Fig. 37
Are, for example, two measurement parameters are selected in the method, the display looks like this (Fig. 38):
Fig. 38
To distinguish between the two measurement parameters, the backgrounds are highlighted in color in this
case.