Failure
Cleaning and maintenance
Clean the caliper before and after using it
with a dry cloth; never use petrol, solvents
or cleaning agents.
Do not immerse the caliper into water.
Liquids can damage the caliper.
Always switch the LCD display
when not using the caliper. This will
extend the life of the battery.
Disposal
The packaging is made of environmentally
friendly materials, which may be disposed of
through your local recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked with
abbreviations (a) and numbers
(b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite
materials.
18
GB/IE/NI
Cause
2. Battery is
the wrong
way round
or the
battery
contact is
poor.
3. The battery
voltage is
lower than
2.1 V.
Solution
2. Remove
the battery
and
insert /
replace
it in line
with the
terminals
and the
chapter
"Insert /
replace
battery"
so that it
touches all
contacts.
3. Replace
the battery
in line
with the
chapter
"Insert /
replace
battery".
off
[
5 ]