Temperature Control - Tecno-gaz Orma Mode D'emploi

ENGLISH
Reset remain:
According to the number on the coiled film or estimated value of remain, reset remain
of the film.
Press the Up key to
increase 100
Press the Down key
to decrease 100
Temperature Control:
There are 9 levels of the temperature that is from 1 to 9, and the default level is 2.
According to personal preference, the level of the temperature can be micro‐adjusted.
Press the Up key to
increase the level
of Temp.
Press the Down key
to decrease the level
of Temp.
Reset time:
According to the down figure, adjust the current time.
Press the Up
key to increase the
number
Press the Down
key to decrease the
number
10
Press the Enter key
to save and back
Press Enter key to
save and back
Press the Next key to
move the cursor to select
the number
Press Enter key to
save and back