Troubleshooting - Tecno-gaz Orma Mode D'emploi

ENGLISH
TROUBLESHOOTING
FAILURE
Blocking
Non‐separeted
film
Delivered film
bias
Delivered
direction bias
Poor shaping
effect
REASON
External blocking
Internal blocking
Serious blocking
Non‐functional
The film is not normally
located
Natural wind too high
The air outlet
loosened or bias
Shearing problem
Bottom outlet for
ventilation blocked
TROUBLESHOOTING METHOD
Pull out the film from the outlet for next
usage or withdraw it for another
installation.
Contact professional personnel for repair
Withdraw it for another installation
Contact professional personnel for repair
Re‐install it according to the page 6‐7; pull
the film in place until the film position is
Open the top cover to check the rotation
of the coil. If interference is found, get rid
Place the machine in the leeward location
Contact professional personnel for repair
Contact professional personnel for repair
Check the machine bottom and get rid for it
14
correct
of it.