Publicité
Maintenance
User-Maintenance Instructions
Lubrication
All moving parts are sealed in a permanent
supply of
lubricant
or are equipped
with oilless bearings.
Additional
lubrication
will not be necessary.
Care of Your Dryer
Clean the lint filter after drying each load. The lint
filter may be washed if needed. Annually
remove lint
filter and screw to vacuum
the duct under it.
Ordinarily,
the dryer cylinder will need no care.
Wipe the dryer cabinet as needed. If detergent,
bleach
or other washing products
have been spilled on the
dryer, wipe immediately.
Some products
will cause
permanent
damage if spilled on the cabinet.
Use only a damp or sudsy cloth for cleaning
the
control panel. Some spray prewash products may harm
the finish on the control panel.
NOTE: The wiring
diagram
is located inside the
control panel.
CAUTION
Label all wires prior to disconnection
when
servicing
controls.
Wiring errors can cause
improper
and dangerous
operation.
W049
Exhaust
System
The exhaust
duct should be inspected
after one year of
use and cleaned if necessary.
Inspect and clean exhaust
duct every one to two years as required
thereafter.
The weather
hood should be checked
frequently
to
make sure the dampers move freely, dampers
are not
pushed in and that nothing
has been set against them.
Keep dryer area clear and free from combustible
materials,
gasoline and other flammable
vapors and
liquids.
Do not obstruct the flow of combustion
and ventilation
air.
NOTE: Verify proper operation
after servicing.
512023
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
29
Publicité
