Publicité
Installation
Step 4: Wipe Out Inside of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent
and water solution,
and a damp
cloth to remove shipping dust from inside dryer drum.
Step 5: Plug In the Dryer
Refer to section on Electrical
Requirements,
and
connect the dryer to an electrical
power source.
Figure 6
DRY689N
ELECTRIC
Connect
to 30 Amp circuit.
D0061
Figure 7
GAS
Plug cord into separately
fused 15 Amp circuit.
D2541
Figure 8
Step 6: Check
Installation
Refer to Installer
Checkfist
on the back cover of this
manual and make sure that dryer is installed
correctly.
512023
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
11
Publicité
