Publicité
OPERATION
You can check the set times much the same
as temperature. Touch
the minute minder setting. Touch
display the Duration. Touch again to display
the End Time. Touch again to displaying the
current time.
To adjust the set time, touch and hold
the currently set time will be displayed. Use
and
to adjust it as needed. Touch
to confirm the setting. The new value is not
set until confirmed.
To change the heating function during oven
operation simply select a new function The
newly selected function indicator starts
flashing while the currently running function
does not change. Touch
selection of a new function. The new function
indicator stops flashing and remains on while
the previous function indicator goes off. If you
do not confirm the new selection, the previous
function will continue.
When you change a function, the set tempe-
rature remains the same.
End a heating function
Touch and hold
By default the oven functions operate indefini-
tely, but you can set the oven to turn off using
a timed operation function or delayed timed
operation function. The only exception is the
pyrolytic cleaning function, which cannot be
modified.
Duration (automatic off)
In this mode the oven will turn off after a
set duration has elapsed. You can set the
duration from 1 minute to 10 hours. To set
timed operation for any oven function, touch
and hold the
sensor, and the
minder symbol will flash on the display. Touch
again, the
display. Now touch
touch
to confirm.
briefly to display
again to
to confirm the
to end a heating function.
minute
symbol will appear on the
to set the Duration and
Touch
/
Touch
to confirm the adjusted setting.
To clear the Duration touch
0:00 and touch
Turning off the oven interrupts the active oven
function. When the set Duration has elapsed,
and
you will hear beeping. Touch any sensor ex-
cept
to mute the beeping. The beeping
stops, the function settings and temperature
are cleared and lighting will turn on for 30 s.
The
symbol will go out. The appliance
will turn off after another 60 seconds.
Note: When you use the
the beeping, the appliance will allow you to
adjust the delayed start time.
91
to adjust Duration as needed.
until you reach
to confirm.
sensor to mute
Publicité
