Doro congress 100 Manuel D'utilisation page 5

On Hold
Press the hold button h to place a call on hold. The LED next to the button will
illuminate. The call can be resumed by pressing the hold button again or from
another telephone connected to the same line.
Memory
This telephone has 10 indirect memories (0-9).
Storing numbers
1. Lift the handset, press
2. Press .
m
3. Press desired location
4. Enter the phone number (max 21 digits).
5. Press
and replace the handset.
P
Calling using memory locations
1. Lift the receiver (or press the headset button) and wait for a dialling tone.
2. Press memory button
3. Select memory location by pressing any of the number keys
A pause may be inserted into the telephone number by pressing P.
Ringer
1. Lift the receiver (ignore the dialling tone) and press the store button
2. Select ring signal by pressing the number keys
table below.
3. Press store button
Melody type
Melody A .........................1=Low, 2=Normal, 3=High
Melody B .........................4=Low, 5=Normal, 6=High
Melody C .........................7=Low, 8=Normal, 9=High
Off* ..................................0
* If the key 0 is selected, the ring signal will be turned off until the next time the receiver is lifted.
After that, the ring signal will revert to the previous setting.
English
(ignore the dialling tone).
P
- .
0 9
.
m
and replace the receiver. The ring signal is now set.
P
Key/level
- in accordance with the
0 9

- .
0 9
and .
#
P