Publicité
Planning the installation
Installation safety
This product has been tested for safety. Note the following precautions:
WARNING!
hot, cold, caustic, or otherwise hazardous liquids. When installing or removing
the refractometer from the process, use personal protective equipment (PPE)
adequate for the process medium and according to the requirements of the
installation site.
WARNING!
harnesses when doing installation work in heights (above 1.2 m (4 ft)).
WARNING!
wash system, make sure to familiarize yourself with safety regulations related
to hot steam and water. For more details, see the related wash system user
guide.
WARNING!
safety.
CAUTION!
documentation. Improper modification or use may lead to safety hazards,
equipment damage, failure to perform according to specification, or decreased
equipment lifetime.
CAUTION!
surfaces may gather dirt and cause contamination in the process.
Required personnel
Installers must have the necessary training to legally perform all required tasks.
8
Process refractometers may be installed in processes that have
Follow installation safety instructions and use safe lifts and
If you have a wash system in place or are planning to install a
Follow local and state legislation and regulations on occupational
Do not modify the unit or use it in ways not described in the
Handle the refractometer with care. Damaged or worn contact
Wear protective eyewear, gloves, safety helmet, and safety
shoes.
M212932EN-C
Publicité
