Publicité
2.5 Electric heating element (optional)
All hot water cylinders have a 1 ½ " outlet for the installation of an electric heater
combined with an integrated double protection thermostat with a control range
from 10°C to 70°C, protection operating temperature 80°C.
Important: The electrical heating element must be connected to the mains
supply by a qualified electrician. When connecting the heating element to
the mains, make sure it is properly earthed.
Storage
Connection Length
tank
capacity, L
120 ÷ 150
200
The technical parameters table shows the installation location of the
electric heating element.
L, mm
1 1/2"
406
1 1/2"
406
Power, W Power supply,
3000
230
3000
230
EN
Length of
integrated L-
V
sensor sleeve,
mm
285
285
Publicité
