Publicité
Note:
there is no regulation in minutes.
The shut-down time can not be lower than the starting time.
If the starting time and the shut-down time coincide the appliance goes into stand-by.
•
Window sensor settings:
1.
Press the
2.
Press the
shows" 23" (the default temperature) press the
the
button to increase or decrease temperature. The
lights next to these symbols
up.
If the temperature goes down too quikly the program switches the appliance to stand-by
mode: press the
program: the corresponding light will shut-down and the appliance works with the
previous functions.
3.
When both "window sensor settings" and "weekly program" are active the appliance is
on when both functions are active and is off if the functions are inactive.
To switch off the appliance, press the "
outlet.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and wait for before it has
completely cooled down.
• To clean the body use a soft damp cloth; do not use abrasive products.
• Do not submerge any part of the heater in water or other liquids; if this should happen,
do not put your hands into the liquid, firstly remove the plug from the power socket.
Carefully dry the appliance and check that all the electrical parts are dry: if in doubt,
contact professionally qualified personnel.
• From time to time clean the grid to remove fluff, dust or other deposits, to improve the
performance. Use a vacuum cleaner or a cloth.
• If you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the
socket) and make dangerous parts harmless if children are allowed to play with them.
• Used battery of the remote control must be disposed of at appropriate collection centres
at your local authority or in suitable containers. In this way, local laws will be respected.
button: the appliance switches on.
button to set the temperature: the display
button to start the appliance. Press the
or
, °C, "I"e"II" should light
" button, then eject the plug from the power
21
button to disable the
Publicité
