Wall mounted heater for indoor heating
This symbol invites you to read these instructions carefully before
using the appliance, and also inform third parties of them, if necessary.
Store this booklet for future reference and for the entire lifetime of the
device. If any parts of these instructions prove difficult to understand
or if in doubt, contact the company at the address written on the last
page before using the product.
This symbol highlights instructions and precautions for safe use.
Warnings and appliance installation, use, cleaning and maintenance
procedures may be updated slightly from those described in this
manual; for further details, please consult the updated on-line manual
at www.bimaritaly.it.
IPX2
This symbol indicates the isolation class IPX2. The appliance is
protected against water drops with a maximum inclination of 15°.
This symbol means :
Attention the appliance is a second class appliance
This symbol
ATTENTION: to avoid overheating don't cover
the appliance.
GENERAL ADVISE
• This appliance is designed to heat indoor domestic and similar
environments only; it must be installed only on the wall and used as
specified in these instructions; furthermore, it is to be considered an
additional heating unit, and not a source of primary / central heating.
Examples of appliances for domestic use are those used for common
house purposes, in domestic environments and that can be used by
non-experts:
- in shops, offices and other similar workplaces;
- in farms or similar businesses;
- by guests in hotels, motels and other residential type environments;
- in bed and breakfast accommodation.
• The appliance must be installed as specified in the "Installation"
paragraph, must not be used in dusty areas or in areas with airborne
particles/materials (which may block the grids), or in the presence of
means:
13