Publicité
To sobstitute the battery move the
plastic tab to the centre and
simultaneously remove the battery slot.
Sobstitute the battery (following the right polarity) and close the battery slot. For
longer inactivity periods please remove the battery.
The remote control is divided in 3 areas:
To start the appliance insert the plug in the power grip: press the button on the side in pos.I,
this should light up on the display
appliance press the "
The appliance can be used in two different modes:
-Normal: power, temperature and time are regulated by the control panel and the remote
control.
-Weekly program: power, temperature and time are regulated and preset for the 7 weekdays,
they are activated by the remote control.
If there is no preset for the temperature the appliance will work for 12 hours and then go into
stand-by.
Normal mode
L'apparecchio ha i seguenti elementi di regolazione e comando:
• Main switch(I/0) if it is in pos."I" the appliance is in stand-by, in pos. "0" the appliance is off.
• The button "
activates the other functions. It puts the appliance in stand-by. This symbol lights up on the
display "- -".
•
Oscillation for alternative "front-low" air direction: function is active, by pressing the "
" to the remote control. To delete the oscillation press again the button swing of
the remote control.
Area which contains the buttons for normal mode.
Area which contains the buttons to confirm the
selected mode.
Area which contains planning buttons.
" button and select the right mode.
" on the keyboard and on the remote control"
(it means the appliance is in stand-by) to start the
17
": starts ventilation and
Publicité
