Publicité
Weekly program (only remote control)
•
The
button on the remote control: shows the "window sensor" that checks if the
temperature goes down by 5-10°C in less than 10 minutes and if it does it stops the
appliance for 30 minutes and then goes in stand-by.
•
The
button on the remote control: chooses the days of the week (d1-d7).
•
The
button on the remote control: activates the weekly program.
•
The
button on the remote control: selects the start time of the daily program.
•
The
button on the remote control: activates the day program with a maximum of 6
periods (P1-P6) .
•
The
button on the remote control: selects the stop time of tha daily program.
These functions are regulated with the remote control:
•
HOUR/MINUTES/DAY setting (appliance has to be on or in stand-by). Press the
button, you should see the number "12" on the display, set the right hour with the
and the
button. Press the
display, set the correct minutes with the
should see "
(d1=Monday; d2=Tuesday; d3=Wednesday; d4=Thursday; d5=Friday; d6=Saturday;
d7=Sunday). Press the
information set.
For example: 09.30 a.m., 3° day (Wednesday), 25°C, II power level.
Note: if the appliance is switched off or if the plug is removed from the outlet the instructions
are erased which mean they have to be reinserted.
•
TEMPERATURE regulation when the appliance is in function press the
button, on the display you'll see the default temperature"23". Press the
button again, you should see the number "30"on the
" on the display, set the correct day with the
button to confirm, on the display you can see the
and the
button. Press the
19
button, you
and
button.
and or the
and the
,
Publicité
