Cleaning The Rails - Siemens HB 33 K Série Mode D'emploi

Cleaning the rails

Removing
You can remove the inset rails for cleaning.
1.
At the front, press the rails up and take it off.
2.
At the back, pull the rails forward and take it off.
Clean the rails using washing-up liquid and pan
scrapers or brushes.
Replacing
The rails fit on the left and right side.
When installing the rails, do not twist them,
otherwise the shelf positions for the accessories
will not correspond.
The extension (a) must always be at the top.
1.
At the back, put the rails in as far as it goes.
2.
Push the rails back.
3.
Insert the front of the rails as far as it will go.
4.
Push the rails down.
77