Recommendations; Installation On Rigid Backrest - Physipro Symbio Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Owners manual

2. Recommendations

Do not use this equipment without having read and understood this user
manual in its entirety. This manual includes critical information intended
to ensure the safety of the user and the individuals who handle the
wheelchair.
2.1 Basic verification
At the time of delivery and receipt check all parts for shipping damage
before using.
2.2 Safety rules
Several safety measures must be applied to ensure the safety of the user. Note that
the following list is not comprehensive. Therefore, the people who use the Symbio
headrest have the responsibility to use it cautiously:
Do not use the Symbio headrest to push or lift wheelchair.
Installation and adjustment of your Symbio headrest should be performed only
by an authorized dealer or qualified therapist.
Make sure that all screws and adjustments are tightened properly, otherwise
serious injury damage may result.

3. Installation on Rigid Backrest

3.1 Place the mounting bracket to about
4" (10 cm) from the top of the backrest.
3.2 Drill the backrest by using the
mounting bracket as a guide.
3.3 Install the bracket screws and
nuts as shown.
3
ENGLISH

Publicité

Table des Matières
loading

Table des Matières