Publicité
4.3 ATTACH THE EXHAUST HOSE
The air conditioner needs to be ventilated to the outside so that the air
containing waste heat and moisture discharged from the appliance can
be discharged from the room.
Do not replace or extend exhaust hose which will result in decreased
efficiency, even worse shut down the unit due to low backpressure.
Connect the hose
1
connector to one end
of the exhaust hose.
Extend the adjustable
3
window kit to the length
of your window. Connect
the exhaust hose to the
window kit.
10
Connect the windows
2
kit adapter to the other
end of the exhaust
hose.
4
Attach the hose connector to
5
the exhaust air outlet of unit.
6
Adjust the louver at the air outlet, and then switch on the unit.
7
EN
Close your window to secure the
kit in place. It needs to hold the
windows kit firmly in place, secure
the window kit with duct tape if
required. It is recommended that
the gap between the adapter and
the sides of the window should be
sealed off for maximum efficiency.
Adjust the length of the flexible
exhaust hose, and avoid bends
in the hose. Then place AC near
an electrical outlet.
11
Publicité
