2. FOR YOUR SAFETY
Your safety is the most important thing that we are
concerned about!
Please read this manual carefully and fully
understand before operating your appliance.
WARNING
2.1 OPERATION PRECAUTIONS
WARNING- to reduce the risk of fire, electric shock or injury to
persons or property:
■ Please let the portable air conditioner stand upright for at least 24
hours before plugging in.
■ If the supply cord is damaged, it must be replaced by the
manufacturer or similarly qualified persons in order to avoid a hazard.
■ The appliance shall be disconnected from its power source during
service.
■ Always operate the unit from a power source of equal voltage,
frequency and rating as indicated on the product identification plate.
■ Always use a power outlet that is grounded.
■ Unplug the power cord when cleaning or when not in use.
■ Do not operate with wet hands. Prevent water from spilling onto the
unit.
■ Do not immerse or expose the unit to rain, moisture or any other
liquid.
■ Do not leave the unit running unattended. Do not tilt or turn over
the unit.
■ Do not unplug while the unit is operating.
■ Do not unplug by pulling on the power cord.
■ Do not use an extension cord or an adapter plug.
■ Do not put objects on the unit.
■ Do not climb or sit on the unit.
■ Do not insert fingers or other objects into the air outlet.
■ Do not touch the air inlet or the aluminum fins of the unit.
■ Do not operate the unit if it is dropped, damaged or showing signs
of product malfunction.
■ Do not clean the appliance with any chemicals.
■ Ensure the unit is far away from fire, inflammable, or explosive
objects.
04
■ The unit shall be installed in accordance with national wiring
regulations.
■ Do not use means to accelerate the defrosting process or to clean,
other than those recommended by the manufacturer.
■ The appliance shall be stored in a room without continuously
operation sources (for example: open flames, an operating gas
appliance or an operating electric heater).
■ The appliance shall be stored so as to prevent mechanical damage
from occurring.
■ Do not destroy or burn the product.
■ Be aware that refrigerants may not contain any odour.
■ Pipe-work shall be protected from physical damage and shall not be
installed in an unventilated space, if that space is smaller than 9m².
■ Compliance with national gas regulations shall be observed.
■ Keep any required ventilation openings clear of obstruction.
■ The appliance shall be stored in a well-ventilated area where the
room size corresponds to the room area as specified for operation.
Any person who is involved with working on or breaking
into a refrigerant circuit should hold a current valid
certificate from an industry-accredited assessment
authority, which authorizes their competence to handle
WARNING
refrigerants safely in accordance with an industry,
recognized assessment specification.
Servicing shall only be performed as recommended by
the equipment manufacturer. Maintenance and repair
requiring the assistance of other skilled personnel shall
be carried out under the supervision of the person
WARNING
competent in the use of flammable refrigerants.
If you don't understand something or need help, please
contact after-sales services.
2.2 SAFETY PRECAUTIONS ON SERVICING
Please follow these warnings when servicing an appliance with R290.
2.2.1 Check the area
Before starting to work on systems containing flammable
refrigerants, safety checks are necessary to ensure that the risk of
fire is minimized. For repair to the refrigerating system, the following
precautions shall be complied with prior to conducting work on the
system.
EN
05