Publicité
Installation and Operating Instructions
EN
NOTE
Soffit element installation package – KWL 45-160 LE-RP
The soffit channel must be over-insulated . It is not suitable for insulation thicknesses ≤ 100 mm and must not
be installed in this case .
Insulation panels
EXTERNAL SIDE OF WALL
11. Attach any plaster corner rails.
12. Make the gap between the plaster frame and facade resistant to driving rain.
13. Plaster up to plaster frame (see Fig. 18).
Plaster
EXTERNAL SIDE OF WALL
All of the following installation steps for installing the EcoVent Verso ventilation unit can be
found in the Installation and Operating Instructions for the Soffit grille (KWL 45 LG) and the
Unit (KWL EC 45-160) with inner panel!
Fig .16
Over-insulation
EXTERNAL SIDE OF WALL
Fig .18
9
Fig .17
Publicité
